Standards
Fibreboard is produced in accordance with national and European standards. These standards ensure an appropriate marketing of the fibreboard.
| EN 310: Wood based panels- Determination of modulus of elasticity in bending and of bending strength (June 1993) (Conf. in Nov. 1998). |
| EN 311: Wood-based panels - Surface soundness - Fibreboards - test method |
| EN 316: Wood fibreboards - Definition, classification and symbols |
| EN 317 : Particleboards and fibreboards - Determination of swelling in thickness after immersion in water |
| EN 318: Wood-based panels - Determination of dimensional changes associated with changes in relative humidity |
| EN 319 : Particleboards and fibreboards - Determination of tensile strength perpendicular to the plane of the board |
| EN 320: Fibreboards - Determination of resistance to axial withdrawal of screws |
| EN 321: Wood-based panels - Determination of moisture resistance under cyclic test conditions |
| EN 322 : Wood based panels - Determination of moisture content (June 1993).(Confirmed in November 1998). |
| EN 323 : Wood-based panels – Determination of density |
| EN 324-1: Wood-based panels - Determination of dimensions of boards - Part 1 : Determination of thickness, width and length |
| EN 324-2: Wood-based panels - Determination of dimensions of boards - Part 2 : Determination of of squareness and edge straightness |
| EN 325 : Wood-based panels - Determination of dimensions of test pieces (June 1993). (Confirmed in November 1998) |
| EN 326-1 : Wood based panels - Sampling, cutting and inspection - Part 1 :Sampling and cutting of test pieces (June 1994). |
| EN 326-2: Wood based panels - Sampling, cutting and inspection - Part 2 : Quality control in the factory |
| EN 326-3 : Wood based panels- Sampling, cutting and inspection - Part 3 : Inspection of a consignment of panels (October 1998). |
| EN 382-1: Fibreboards - Determination of surface absorption - Part 1 : Test method for dry process fibreboards |
| EN 382-2: Fibreboards - Determination of surface absorption - Part 2 : Test method for hardboards |
| EN 622-1 : Fibreboards – Specifications - Part 1 : General requirements |
| EN 622-2 : Fibreboards – Specifications - Part 2 : Requirements for hardboard |
| EN 622-3 : Fibreboards – Specifications - Part 3 : Requirements for medium boards |
| EN 622-4 : Fibreboards – Specifications - Part 4 : Requirements for softboard |
| ENV 1156 : Wood-based panels - Determination of duration of load and creep factors (May 1999) |
| EN 12369-1: Wood-based panel products - Characteristic values for structural design - Part 1 : Particleboards, OSB and fibreboards |
| EN 13879 : Wood-based panels - Determination of edgewise bending properties |
| EN 13446 : Wood-based panels - Withdrawal capacity of fasteners - Test method |
| EN 13810-1 : Wood-based panels - Floating floors - Part 1 : Performance specifications and requirements |
| EN 13810-2 : Wood-based panels - Floating floors - Part 2 : Test methods |
| EN 12871 : Wood-based panels -Performance specifications and requirements for load-bearing boards for use in floors, walls and roofs |
| ENV 12872 : Wood-based panels - Guidance on the use of load-bearing boards in floors, walls and roofs |
